Documenting Reproduction and Original Vintage Star Wars Weapons & Accessories Since 200
Johnpaul Ragusa Presents..............  

Click here to edit subtitle

Welcome To The Belts Section

Contents: Bib Fortuna, Luke Skywalker AT-AT Grappling Hook Belt, Luke Skywalker Poncho, Princess Leia Poncho, Squid Head, Yoda.

Bib Fortuna Belt Original V1

This V1 has three notches on the outside and the letters 'B' or 'A' on the inside. The V1 is a Darker Grey than the V2.

 

V1 Letter B version.

 

 

 

Bib Fortuna Belt Original V2

The V2 has three notches on the outside and the letters 'D' or 'C' can be found on the inside. There are also three EPMs present. The V2 is a Lighter Grey than the V1.

 

V2 Letter D version.

 

 

 V2 Letter C Version.

 

 

 

Bib Fortuna Belt Original V3

This V3 has only two notches on the outside compared to the V1 and V2. The letter 'F' can be found on the inside. A large and protruding circle is present in the inside centre.

 


Luke Skywalker ORIGINAL AT-AT Grappling Hook Belt

The Grappling Hook Belt was included in the ESB Survival Kit.

The hook, belt and string all float when placed or submerged in water.

 

Luke Skywalker Poncho Belt ORIGINAL V1

The Luke Poncho Belt has three notches (compare this to a Leia Poncho Belt which has two notches). The Luke belt is longer than a Leia belt.

Princess Leia Poncho Belt ORIGINAL V1

The Princess Leia Poncho Belt has two notches (compare this to the Luke Poncho Belt which has three notches). The Leia belt is also shorter than the Luke belt.

The V1 can come with numbers moulded on the inside of the holster. TIG has verified numbers '6', '7' and '8' so far. 

 

 

Princess Leia Poncho Belt ORIGINAL V2

The V2 Leia Poncho Belt is made from a softer plastic than the V1. There is a slight variation with the two notches and the inside of the belt contains two EPMs. The inside of the holster can be found with the number '3' or '1'.

 

V2 with the number '3' present on the inside of the holster.

 

 

V2 with the number '1' present on the inside of the holster.

 

 

Squid Head Belt ORIGINAL V1

Letter A.

 

 

 

Squid Head Belt ORIGINAL V2

Letter D.

 

 

 

Squid Head Belt ORIGINAL V3 Lili Ledy version

Lily Ledy version with letters LL.

 

 

 

Squid Head Belt ORIGINAL V4 with letter 'B'

Letter B.

 

 

 

Squid Head Belt ORIGINAL V5

The V5 belt has the letter F and two EPMs - both present on the front of the two ends.

 

 

 

Squid Head Belt ORIGINAL V6

Letter E.

 

 

 

Squid Head Belt ORIGINAL V7

Letter G and two EPMs - both present on the front of the two ends. This belt is longer than other versions and is a lighter grey colour. The material is hard and not as flexible as other versions.

 

 

 

Squid Head Belt ORIGINAL V8

Letter H. Like the V7, the V8 is longer than other versions and is a lighter grey colour. The material is hard and not as flexible as other versions.

 

 

 

Squid Head Belt ORIGINAL V9

Letter C.

** Pic to come **

Yoda Belt Original V1

The V1 is a thin belt and has a single EPM located next to the lightsaber attachment on the front. The male part of the clasp usually has a long pin with two different width sizes. The inside of the belt has no hollows.

 

Yoda Belt Original V2

The V2 is thicker than the V1. The flashing (painted Silver) on the inside of the lightsaber is part of a large EPM that can also be seen on the belt either side of the pouch. The male part of the clasp usually has a pin with a single-width size. The inside of the belt contains three hollows.

 

 

Yoda Belt Original V3

The V3 is a thin belt. Two EPMs are located on the outside of the belt either side of the lightsaber attachment. The male part of the clasp usually has a long pin with two different width sizes. The inside of the belt has no hollows.

 

 

 

Yoda Belt Original V4

The V4 is similar to the V3 but has an additional EPM located near the clasp (male end). The male part of the clasp usually has a pin with two different width sizes. The V4 pin is usually stubbier than the V3 and has a rounded tip. The inside of the belt has no hollows.

 

 

Yoda Belt Original V5

The V5 can be found with both Lili Ledy and Kenner version Yoda figures. It is a thick belt with EPMs located on the lightsaber, pouch and female part of the clasp. The male part of the clasp usually has a long, single-width pin which protrudes when closed. The inside of the belt has no hollows. The belt can also have a 'protruding dot' found on the strap near the male part of the clasp.

 

 

Yoda Belt Original V6

The V6 is unusual because it has no 'raised dots' running along the top and bottom of the belt strap like the other versions. Otherwise, the V6 is similar to the V3. Two EPMs can be found either side of the lightsaber. The male part of the clasp has a pin with two different width sizes and a rounded tip. The inside of the belt has no hollows.